There are just a few different kinds of water purification systems and the principles of their work usually depend on the issues they’ve been designed to handle. For instance, industrial waste water processing facilities have a range of filtration stages together with microbial elements and debris removal screens. Nonetheless, the purification system bought on AtlasAir will be easier and simpler to install.
The filter type likely to be practical to a family will be the one that can deal with the tap water contaminants. Mind that water in one particular area will vary significantly from the water to water. The filtration method that will be chosen in this or that case will depend upon the water elements that should be removed. More often than not, filters used for home water systems have several different kinds of filtration that are together built into the unit to handle a range of water problems that typically occur in homes.
Three Step Water Purification Elements
Typically, there is more than one stage in the process of water purification, especially in the modern household systems. The reason why the 3-stage filter is the most popular one lies in its efficiency, simplicity and affordability.
Sediment Filters
The very first step in the three-state filtration process usually starts with the so-called sediment filter that is used to eliminate most of the lager particles from the water. The items are usually made of pleated polyester, pleated cellulose or spun polypropylene. Among the three types mentioned above, the pleated cellulose is the most efficient one. However, it is the slowest one as well. Pleated polyester can withstand various chemicals and bacteria, as well as it has a limited reuse capacity.
Kinetic Degradation Fluxion Filters
When the question is about the public water sources, the detoxification process is impossible without chlorine. Nonetheless, a lot of homeowners find the smell and the taste of it offensive and prefer to remove it. At the same time, some of the users feel that the nature of chlorine is hazardous to their health. KDF or the kinetic degradation fluxion part of the 3-stage water purification system converts chlorine to chloride. The filters are made of zinc and copper and that is why they are highly recyclable and reusable.
The final stage of the process of three-step filtration is activated carbon. Either granular, porous or solid, the activated carbon that is negatively charged hooks positively charged elements that stick to it. As the time is passing by, the charge on the carbon is getting dirtier. This leads to the fact that it also is getting reduced. In order words, regular change of the filter is a must.
Distillation is required to purify water through heating it till the moment the molecules of water evaporate and then condense in the other part of the filter. In the process, all the impurities are left behind in the original source of water. There’s an interesting thing about distilled water. Experts state that distilled water is unnaturally pure and that is why some substances are used to re-mineralize it. Minerals form the healthful part of the water we drink every single day.
No comments:
Post a Comment